Inventory

Stock count

A stock count is the number of each item the store has right now, and also the act of counting the shelf to check that number. A good count is the same on the shelf, at the register and on the website.

By Mike Akop, founderUpdated 5 min read

On this page
  1. How a stock count works
  2. Common ways to count stock
  3. A worked example
  4. Where it usually goes wrong
  5. Tips for owners
  6. How MazalPOS handles stock count
  7. Common questions

In short

  • A stock count is both the number in your system and the physical check of the shelf.
  • The system number and the shelf number should match; any gap is a problem to investigate.
  • Counting small groups often beats one huge count a year.
  • Accurate counts prevent overselling, stockouts and wasted cash tied up in extra stock.

How a stock count works

The word means two things, and both matter. First, the stock count is the number your system holds for each item, such as 36 bottles of cleanser. Second, a stock count is the job of walking to the shelf and counting what is really there.

Day to day, the system number changes by itself. A sale takes one off, a delivery adds some, a return puts one back, and a transfer moves units to another location. If nothing goes wrong, the number stays true. Things do go wrong, though: a short delivery, a broken item, a wrong size rung up. So every so often you count the shelf and compare it to the system.

When they match, nothing to do. When they do not, you find out why if you can, then correct the system to the real number. That correction is called an adjustment, and good records note who made it and the reason.

Accurate counts matter because decisions depend on them. You reorder based on them, your website shows or hides items based on them, and your profit report depends on the value of stock on hand. If the count says 5 and the shelf holds 0, you will sell something you do not have. See overselling.

Common ways to count stock

  • Full count. Every item in every location, usually done once or twice a year, often with the store closed. Thorough but slow and tiring.
  • Cycle count. A few product groups each week or month, rotating through the whole store over time. It keeps numbers accurate with less disruption.
  • Spot check. Counting a single item when something looks wrong, such as a best seller that sells out sooner than expected.
  • Receiving count. Counting a delivery as it arrives, against the supplier's invoice. See receiving.
  • Blind count. The counter does not see the system number, so they cannot just agree with it. It reduces lazy counting.

Most stores do best with cycle counts plus a receiving check, and a full count only when needed, for example at year end for tax or accounting.

A worked example

This is an example for a small jewelry store. On Monday the owner cycle-counts the ring case.

  • Silver band, size 7: system 6, shelf 6. Match.
  • Silver band, size 8: system 5, shelf 3. Short by 2.
  • Gold stud earrings: system 12, shelf 12. Match.

The size 8 gap is the interesting one. She checks the day's tickets and finds one was rung up as size 7 by mistake, which explains 1 unit. The other unit has no explanation. She adjusts the system to 3, writes the reason, and moves on.

Why it matters in dollars: each band cost her $22 and sells for $60. If the system had stayed at 5, her website would show 5 available. A customer might order 4, and she would have to cancel or backorder 1 to 2 of them, losing the sale and some goodwill. The correction took ten minutes.

The unexplained unit is a $22 cost. If the same thing keeps appearing on the same item, she knows to look closer. See shrinkage.

Where it usually goes wrong

  • Counting during busy hours. Sales happen mid-count, and the numbers end up neither old nor new.
  • Forgetting the back room. Stock sitting in boxes or on the other side of the store is missed, so the count looks short.
  • Mixing up sizes and colors. Each version needs its own count. See variant.
  • Adjusting without a reason. Fixing the number hides the cause, so the problem comes back.
  • Only counting once a year. Errors pile up, and by then nobody remembers what happened.

Tips for owners

  1. Pick a small group of items each week and count them on a quiet day.
  2. Start with items that are expensive, small or sell fast.
  3. Give each location its own count, and have different people count and record when possible.
  4. Write down the reason for every adjustment.
  5. Compare the stock value to your records each month. Big swings deserve a look.
  6. Set a low-stock level for each item so you reorder before you run out. See low-stock alert.

How MazalPOS handles stock count

MazalPOS keeps one live stock count shared by the register, the online store and every location, so you do not sell what is already gone. You can count stock from your phone, receive stock from a photo of the supplier invoice, and see cost and value tracking. Low-stock alerts warn you before an item runs out.

Common questions

They usually mean the same thing in everyday use. Some stores use stock take for the physical counting job and stock count for the number held in the system.

A few product groups each week works for many stores, with fast sellers and high-value items checked most often. Do a full count at least once a year if your accountant needs it.

Look for a cause first: a wrong size, a short delivery, a missed return. Then correct the system and write down the reason.

You can, but pick quiet times and count small sections. Sales during a count are what cause most confusion.

Stock transfer

Want the full guide? Read How to Sell Online and In Store From One Inventory.

Written by Mike Akop, founder of MazalPOS. We build and support the register, online store and staff app that stores from Las Vegas to Honolulu run on. Questions about this term? Talk to a real person.

Not sure where to start?

Talk to a real
person today.

Tell us how your store works and we will show you MazalPOS with your own products.

14 days free. No card. Cancel anytime.